Our louvered gable vents are designed to provide superior ember protection for gable openings while decorative architectural details. Designed to block wind-driven rain and wind-blown embers, our louvered EmberVents™ combine functionality with a clean, louvered appearance, offering both safety and style for your home’s wildfire defense.
Need Frame Width and Net Free Area
Aperture: 0.0657”
Wire Diameter: 0.018”
Finish: Black Powder Coat
Stainless Steel Grade: 304
WUI & IWUI Compliant
Class-A Rating
Ignition Resistance Rated
Tested for Ember and Flame* Impingement
STOPS the embers from entering.
TRAPS embers within the mesh aperture.
REFLECTS the radiant heat from fires.
FireStorm® EmberVents™ and EmberMesh™ are rigorously tested and certified to meet the highest standards for fire resistance and safety. These products have been evaluated to ASTM E2886, ASTM E84, and ASTM E2768 testing standards, ensuring their durability and effectiveness in wildfire defense. Additionally, our vents are compliant with IBHS's "Wildfire Prepared Home" program and approved for use under California’s Chapter 7A building code, as well as other state IWUI requirements. With FireStorm, you can trust that your home is protected by solutions that exceed industry standards for performance and reliability.
While FireStorm® EmberVents™ and EmberMesh™ are approved for vertical installations under California’s Chapter 7A building code, certain horizontal applications may require materials beyond mesh-only solutions. Please consult your local building codes and regulations to ensure compliance with all installation requirements.
Check out the FireStorm® EmberVent™ product specs and download the Spec Sheet to find everything you need to know.
Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials [QAI Listing # B1155]
Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flames Impingement [QAI Listing # B1155]
Fire Test on Non-Mechanical Dampers Used in Vented Construction [QAI Listing # B1155] *Not recommended for flame defense
FireStorm® EmberMesh™ and EmberVents™ meet the requirements of the California Building Code, Chapter 7A - 706A2 when installed in a vertical orientation.*
FireStorm® EmberMesh™ and EmberVents™ meet the requirements of the California Building Code, Chapter 7A - 706A2.1
Minimum standards for the location, design, and construction of buildings and structures based on fire hazard severity in the wildland-urban interface.
FireStorm® EmberMesh™ and EmberVents™ meets or exceeds the following 2024 IWUIC.
FireStorm® EmberVents™ are made out of 304 Stainless Steel making it the best choice for those who want a durable material.
Firestorm® EmberVents™ are designed for defense! They are resistant to flames, embers, and corrosion, and are able to withstand exposure to the elements without degrading or breaking down.
Firestorm® EmberVents™ are designed with a small aperture to keep embers out, including debris.
The small aperture size prevents embers from passing through the mesh, which is a major concern for those who live in W.U.I areas.
If the existing vent obstructs the installation of the new vent screen, carefully remove it. If the vent is recessed and does not interfere, you can leave it in place.
Measure the dimensions of the rough opening where the new vent will be installed. Ensure accurate measurements to select the correct size vent. Choose one of our vents that is big enough to ensure that our mounting flange sufficiently over laps your building material and allows you to securely fasten our vent to your building, leaving no gaps for possible ember penetration.
If you have chosen one of our available colors, you can skip this section and begin mounting your vent. If you’ve chosen our Bonderized finish option, you can paint your vent directly without the need for primer. Masking off the vent face is optional. Our black powder coating nearly disappears once the vents are installed. Select the appropriate fasteners based on the type of siding on your home. This could include screws, nails, or other fasteners suitable for your siding material.
Position the new vent over the rough opening and secure it using your selected fasteners. We recommend fastener spacing of 6”. Ensure the vent is firmly attached and properly aligned with the siding. For uneven surfaces, more fasteners may be needed. If you find screwing directly through the metal frame difficult, you can pre-drill guide holes at each corner of the metal frame with a metal drill bit. This will make screwing the fasteners much easier.
Ensure that your vent is securely fastened to your siding and that there are no gaps bigger than 1/16” that could allow for ember intrusion.
For installation instruction on our full vent assemblies, such as dormer vents, gables vents, and 2-way vents, consult your local building professional.
Give us a call or submit your information via the form and a team member will get back to you.
Our louvered gable vents are designed to provide superior ember protection for gable openings while decorative architectural details. Designed to block wind-driven rain and wind-blown embers, our louvered EmberVents™ combine functionality with a clean, louvered appearance, offering both safety and style for your home’s wildfire defense.
| Vent Size | 12" x 12", 12" x 18", 14" x 8", 14" x 12", 14" x 18", 14" x 24", 18" x 24", 22" x 30" |
|---|
Only logged in customers who have purchased this product may leave a review.
We are making FireStorm Building Products available to the public early due to the overwhelming demand!
You can access our products in one of two ways:
California Residents
Please enter your zip code to find a store near you!
Reviews
There are no reviews yet.